Long Electric Life Agsno2 Series Contact for Relays and Switches

Over the years, we continue to innovate and break through, dedicated to providing customers with good quality 5 pin 30 amper relay, traffic light relay, 12v relay Spdt. The essence of our services is to create revenue by enhancing value, and to quickly find the value-added points of our services to plow deeper and deeper. Based on the principle of customer first, the company has won the unanimous recognition of many partners with sincere after-sales service and all-round technical solutions.

1 Product Survey of 20 ampere power relay 12v

Product Features :

◆ Heavy Load: Max 20A

◆ High Sensitivity:200mW

◆ Fit for PCB

◆ Complies with RoHS Directive

◆ Flat type

◆ Flux-tight&Sealed type available

◆ Dimensions: 23.0*16.2*10.6 mm

◆ It Can replace Hongfa's similar relay with model No. HF7520

Name principle for this relay.

BS6-12-A  S  T  W  -P T105℃

 1    2  3  4  5   6   7   8

1,BS6：Model No.    2, 12: Coil rated power(VDC):5,6,9,12,18,24,48    3, A：Contact Form: one group of Normally Open

4,S：Sealed type;None：Flux-tight type   5, T：Contact Material: AgSnO2 ;D:AgCdo   6,W: white; None: black  

7,-P：heavy-load 16A/20A;None: Normal type 12A

8,T105℃: ambient temperature 105℃; none: normal ambient temperature

Overview

Power Relay 12v is a device that can produce jump in one or more electrical output circuits when the input (or excitation) meets some specified conditions. It can be used in neutral point direct grounding system as directional element of zero sequence current protection. A relay with a wattmeter to sense the direction of current. In parallel units, the reverse current (such as the current flowing back to the generator set) will activate the reverse power relay to disconnect the unit from the system.

Power Relay 12v is an electrical device used to switch high current, or a device sensitive to voltage. The relay cuts off the control switch load and adjusts the conductive section when the low voltage decreases. It also realizes the function of interlocking circuit. As a leading company in the industry, we not only uphold stringent product quality standards, but also minimize the negative impact on the environment in the entire process of product development and service delivery.  Our company always insists on customer orientation, always insists on technological innovation as the first productive force, and actively carries out cooperation between industry, academia and research. 

2 Parameter chart of 20 ampere power relay 12v

Contact Rating
Contact Form	1A
Contact Material	AgCdO AgSnO2
Contact Load Capacity	16A 250VAC/30VDC,16A 125/277VAC, TV-5 125VAC, 1/3HP 1/4HP 120VAC/125VAC
	120W tungsten lamp load, 0.2W:800va,960va 0.36W:1385VA Electronic ballast load
Switching Power Max.		480W 4000VA
Switching Voltage Max.		30VDC/277VAC
Switching Current Max.		20A
Contact Resistance Max.		100mΩ(1A 24VDC)
Life expectancy		Electrical	10 5
		Machanical	10 7

Coil Rating
1A 200mW							1A 360mW
No.	Coil Voltage		Coil Resistance Ω±10%	Pick up (VDC) Max. (80% of Rated Voltage)	Drop out (VDC) Min.(10% of Rated Voltage)		No.	Coil Voltage		Coil Resistance Ω±10%	Pick up (VDC) Max. (80% of Rated Voltage)	Drop out (VDC) Min.(10% of Rated Voltage)
	Rated	Max.						Rated	Max.
5	5	6.5	125	4	0.5		5	5	6.5	62.5	4	0.5
6	6	7.8	180	4.8	0.6		6	6	7.8	90	4.8	0.6
9	9	11.7	405	7.2	0.9		9	9	11.7	202.5	7.2	0.9
12	12	15.6	720	9.6	1.2		12	12	15.6	360	9.6	1.2
18	18	23.4	1620	14.4	1.8		18	18	23.4	810	14.4	1.8
24	24	31.2	2880	19.2	2.4		24	24	31.2	1440	19.2	2.4
48	48	52.8	11520	38.4	4.8		48	48	52.8	5760	38.4	4.8

Technical Rating
Insulation Resistance		Min.1000MΩ(500VDC)	IEC 60255-5
Dielectric Strength	Between Coil&Contact	1000VAC 1min	IEC 60255-5
	Between Contacts	2500VAC 1min	IEC 60255-5
Operate Time		≤10ms
Release Time		≤5ms
Shock Resistance		Operation extremes 10G Damage limits 100G	IEC 68-2-27 test Ea
Vibration Resistance		10Hz～55Hz amplitude 1.5mm	IEC 68-2-6 test Fc
Leading-out Form		PCB type	IEC 68-2-21 test Ua1
Ambient Temperature		﹣40℃～85℃;﹣40℃～105℃
Relative Humidity		85% RH	IEC 68-2-3 test Ca
Weight		Approx.8.0g
Package		Sealed,Solder-proof type

Safety Certification
Approval	CQC/TUV	UL
Load	16A 250VAC 30VDC	16A 277VAC,16A 125VAC, TV-5 125VAC,1/3 Motor, 1/4 Motor, 1200W Tungsten, 800VA E.B, 960VA E.B, 1385VA E.B.

3 Size and circuitry of 20 ampere power relay 12v

Outline Dimensions

Bottom View Layout

Wiring Diagram(Bottom View)

4.FAQ

Q: Which certificate do you have?

A: UL, TUV, ISO, REACH, ROHS and CQC.

Q:If l have a product wants to be made in other special material, can you do it?

A:Of course, you just need to provide us designed drawings or sample and R&D department will estimate that whether we can do or not, we will give you the most satisfactory reply.

We hire a professional technical team with high wages to ensure the quality of the Long Electric Life Agsno2 Series Contact for Relays and Switches and fast improvements. We are good at quickly applying new technologies to our product development, so that our products have been continuously optimized. While striving to achieve self growth and good business performance, we also actively give play to the advantages of scientific research and production in related business areas.

Hot Tags: 20 ampere power relay 12v, China, suppliers, manufacturers, factory, made in China, 10a 12v spdt relay, self powered relay, power sensing relay, Automotive Timer Relay, 2x8 amp relay, 4 pin 10 amp relay